 |
PM |  | |
Quote | | |
Reply | | |
Full Topic | |
| Joined: | 03-17-2005 |
| Location: | Hilton, New York USA |
| Posts: | 798 |
| Status: |
Offline
|
Hope this helps.
Brett.
| View single post by Brett Gibson JH5 20497 | |||||||||||||
| Posted: 04-04-2005 05:39 pm |
|
||||||||||||
Brett Gibson JH5 20497
|
Rory, sounds like it's running lean, try with the air cleaner off raising the barrel in the carb about 1/8" quickly to see if the speed picks up, ( it should ) if not you need to play with the mixture needle adjustment, I assume the floats in the bowel were set correctly, plus a couple of other areas would be the temp compensator and that small daiphgram thing (cant recall what they call it) on the sides of the carb, I have both of those blocked off and that gave me better control and responce, becarefull running lean valves dont like that alot richer is better to a point. Hope this helps. Brett.
|
||||||||||||
|
| |||||||||||||