Jim DeClerck
|
I did see the previous post with your helpful instructions and I have the Shop Manual with the diagram. The car is in the air, but the carbon fiber (larger diameter) driveshaft blocks access to the sleeve I have to spread, so it needs to be dropped. PO may have contributed to the rattle by putting a large metal washer between a section of rubber hose and the sleeve. It is loose to the touch and could be the culprit. We'll see.
I taught SCUBA for a few years for PADI at the CYO downtown Rochester. Did many dives in Canandaigua, including through the ice in winter. Great sport. Looking forward to swapping lies next visit.
|
