View single post by noomg
 Posted: 11-30-2025 02:34 pm
PM Quote Reply Full Topic
noomg

 

Joined: 08-02-2018
Location: Long Beach, California USA
Posts: 495
Status: 
Offline
 Regarding the jets if you've got debris in your fuel due to rust or dirt or whatever either jet (Grosse or OEM) can stick. A quick fix would be an in line fuel filter and if it clogs you know where the problem is.

Vance raised an interesting point about gas migration. I experienced this but not with the carb floats. When my gas gauge wasn't reading I pulled the tank sending unit and found the plastic float was filled with gas. I checked it throughly for holes or cracks and found none after decades the gas had just gotten in there. Something to consider if your gas gauge is sluggish or reads low.