 |
PM |  | |
Quote | | |
Reply | | |
Full Topic | |
| Joined: | 04-07-2022 |
| Location: | Oregon USA |
| Posts: | 108 |
| Status: |
Offline
|
Okay, here is where things are now.
Crank pulley is beyond TDC alignment.
Intake cam is aligned at 110 IN.
exhaust cam pulley is between 110 IN and 115 EX.
Is the crank pulley misaligned?
Without a picture, it is difficult to say. Many have noted that they have a slight misalignment after setting things as close as they can.
Without knowing how big a misalignment is meant by "beyond" and "between 110IN and 115EX" I cannot really be certain.
I would ask this question: Is it possible to reduce the size of the errors if you remove the belt, reposition the sprockets, then reinstall the belt? If the answer is yes, the crank sprocket and the exhaust sprocket (at least) are misaligned.
Vance
Last edited on 06-30-2025 12:11 am by vnavaret