 |
PM |  | |
Quote | | |
Reply | | |
Full Topic | |
| Joined: | 08-02-2018 |
| Location: | Long Beach, California USA |
| Posts: | 474 |
| Status: |
Offline
|
"Hopefully this won't take too long", that's funny.
I'm not clear on what you've got going here. So you want to remove the seats to access the floor pans and cross members (seat mounts). You have two sets of seats, the originals still in the car and a set from a Jensen GT correct? The GT seats are the same ones used in the Jensen-Healey so all adjustments are the same. The only real difference between the two is upholstery and headrests.
The chrome lever on the door side of the seat bottom moves the seatback fore and aft. The lever under the front of the seat moves side to side and moves the seat forward or back in the car.
"The seats and rails have been replaced", what seats were replaced, the originals? If that's the case wouldn't you already know how to remove the seats? And what rails, do you mean the crossmembers that the seats are mounted to or are you talking about the adjustment rails on the bottom of the seats?
Once the seats are out you can assess the floorboards and crossmembers, Delta has all pieces you'll need.