 |
PM |  | |
Quote | | |
Reply | | |
Full Topic | |
| Joined: | 04-07-2022 |
| Location: | Oregon USA |
| Posts: | 101 |
| Status: |
Offline
|
Thanks, the seats and rails have been replaced, but they rock like there are parts missing, I have the original seats. I'll get the seats out then access. Where is the adjustment, I might just not know where to look?
Hopefully this won't take too long as it is in pretty good shape except for a few things.
The rocking may be due to corroded seat mounts which are sheet metal with captive nuts and welded to the floor pans (arrowed in the picture). As far as accessing the adjustment controls, if the seats are not original all bets are off.
The fore/aft adjustment on an original seat is a lever below the outside edge of the front seat bolster, move the tip of lever towards the door and slide the seat. The tilt for the back is a lever on the side of the seat closest to the door, at the junction between the bottom of the seat and the seat back.
If you are having difficulty finding the adjustments, I must ask if the new seats have any adjustments at all.
Attachment: Screenshot 2025-06-11 154441.jpg (Downloaded 18 times)
Last edited on 06-11-2025 10:52 pm by vnavaret