 |
PM |  | |
Quote | | |
Reply | | |
Full Topic | |
| Joined: | 03-13-2005 |
| Location: | Okla. City, Oklahoma USA |
| Posts: | 40 |
| Status: |
Offline
|
It will take some force while working the wheel back and forth. Or if that fails and with a second person (wife works great) using a small hammer and punch in the center of the stud you pull back on the wheel while they TAP on the stud. It should come right off.
Be VERY carefull not to lose the two piece tappered guide that is on the steering shaft (also observe the direction it is installed)
Rory 73-JH