View single post by browndog9
 Posted: 09-21-2022 02:41 pm
PM Quote Reply Full Topic
browndog9

 

Joined: 09-18-2015
Location:  
Posts: 41
Status: 
Offline
Understand I was not familiar with anything as far as physical connection when it first happened. It was something that just happened. Later I planned to take the car to ABCD Round Rock and I figured I bette solve the problem.
I took off rhe steering wheel, not factory, and removed the top soft cover and realized what I was doing made no sense at all.
After much thought I think I was somehow affecting the contact that the ground wire made to the male spade connector the lock assembly opposite of the wire bundle.
This looks to be attached with a po rivot that is loose.
I will see if I can titen or solder joint and see if the problem is solved.
Will let you know.