 |
PM |  | |
Quote | | |
Reply | | |
Full Topic | |
| Joined: | |
| Location: | |
| Posts: | |
| Status: |
Offline
|
With the below it bogs down bad at around 1,200 rpm
DHLA 45
Choke 36mm
Idle Jet 55
Idle Jet Holder 7850-6
Main Jet 160
Air Corrector 230
Emulsion Tube 7772-8
Changed idle jets to 62s and it bogged down around 2,200
Changed main jets to 145s and pretty much the same.
Pulled the main jets and just ran on the idles. Ran better, could get almost to 3,000 rpm. Found a "how a dellorto works" post you did in 2017 and thinking I may have the floats too low and the "gas froth" is not high enough and starving the engine?