View single post by discogodfather
 Posted: 01-03-2022 06:15 pm
PM Quote Reply Full Topic
discogodfather



Joined: 09-17-2007
Location: San Francisco, California USA
Posts: 221
Status: 
Offline
 I remember replacing all my battery cables with stuff I found at a local O'Reileys, just measured the stock ones and they had a similar one in stock. I upgraded to 4 gauge. I think stock is 6 gauge.

Going to the terminal with the brown wires is fine, but it's tight on these Denso starters. I had to push them off in opposing directions. The nut for the terminal was also very thin on these, it might be a good idea just to make another short length of cable and connect it in a Y shape, it depends on the circumstances.