View single post by Tom Bradley
 Posted: 11-29-2021 01:08 am
PM Quote Reply Full Topic
Tom Bradley

 

Joined: 07-15-2013
Location:  
Posts: 200
Status: 
Offline
Not sure if this helps, but many years ago I found some replacement aftermarket wheel bolts that worked. (See comparison pic). I measure slightly less than Bruce: 0.518"-ish on the outside. The flat part of the replacement bolt looks flush with the inside depth of the knurl and measures 0.494". Assuming that this was a standard size and not something weird, my guess is that the 0.507" sized bolts will likely work.

Attachment: wheel studs.jpg (Downloaded 106 times)