View single post by redracer
 Posted: 07-29-2020 01:23 am
PM Quote Reply Full Topic
redracer

 

Joined: 09-10-2012
Location: BROOKHAVEN, Georgia USA
Posts: 626
Status: 
Offline
 if you switched the cylinders, that means you had the door panels off, etc. You should look at the mechanism that's working and see if you're missing whatever on the "bad" side(yes, they should BOTH lock with a key).
When the "bad" cylinder was out, would it turn fully with the key? If not, it may be a bad cylinder(there are only 5 pins in the door, trunk, and glove box lock and easy enough to pull the pins out and rearrange)