View single post by pokeyjoe
 Posted: 05-20-2020 05:22 pm
PM Quote Reply Full Topic
pokeyjoe

 

Joined: 10-01-2019
Location: Long Beach, CA USA
Posts: 28
Status: 
Offline
 And down the rabbit hole you go.

I don't think there is any way to check for fluid in the booster without removing it. When I removed my MC, there was fluid between the MC and the booster (and a lack of paint underneath the area where it dripped). I decided to remove the booster (required pedal box removal). When I pulled the check valve out and rolled the booster around, fluid came out the hole.

Removing the pedal box isn't any fun, but does provide an opportunity to re-seal the pedal box to the firewall and help prohibit water ingress.