View single post by redracer
 Posted: 03-17-2020 03:04 pm
PM Quote Reply Full Topic
redracer

 

Joined: 09-10-2012
Location: BROOKHAVEN, Georgia USA
Posts: 652
Status: 
Offline
 The "voltage stabilizer: controls ONLY the temp & fuel gauges(NOT the tach). If the ground for that is not working, the needle for those two gauges will read 22 1/2 degrees higher(I.e. CCW rotation-your temp gauge will look "HOT").
ALL the gauges MUST be grounded for not only the night lights to work but any internal parts that need grounding(such as the TACH)