View single post by redracer
 Posted: 09-25-2019 05:17 pm
PM Quote Reply Full Topic
redracer

 

Joined: 09-10-2012
Location: BROOKHAVEN, Georgia USA
Posts: 296
Status: 
Offline
I think this was answered, but the fuses are NOT the same # as printed on the original LUCAS fuses. 35 amp Lucas would be around 17 so I use standard 20 amp fuses. If in fact someone put a 35 amp fuse in(non Lucas) the wire would melt before the fuse blew.
Hope that helps if you haven't already seen this.
bruce