|View single post by Max_dvdt|
|Posted: 09-02-2019 04:18 am||
|I have a 910 conversion underway
- This requires two tweaks to the front subframe:
A) the passenger (US) outrigger needs relieving
B) there is a contact point on the drivers engine mount structure.
C) I suppose a third issue is that the drivers 907 engine mount interferes with the new girdle.
The question today is how do I remove the outrigger (the thing with the yellow paint) I've undone the bolt thru the front suspension lower arm, the bolt thru the steering rack, the frame bolt and the huge lower control arm bolt
but this thing seems glued on...
Attachment: Front subframe2.jpg (Downloaded 158 times)
Last edited on 09-02-2019 04:22 am by Max_dvdt