 |
PM |  | |
Quote | | |
Reply | | |
Full Topic | |
| Joined: | 06-24-2006 |
| Location: | Charlotte, North Carolina USA |
| Posts: | 106 |
| Status: |
Offline
|
Steve
| View single post by flatlanderep | |||||||||||||
| Posted: 08-02-2019 01:48 am |
|
||||||||||||
flatlanderep
|
I removed the master cylinder and decided to put a washer that I slightly less than 1/16 in. I placed it so it is flush on the servo unit and then placed the lock washer and tightened the nut. I took it out for a 25 minute drive and brakes did not lock! Temp gauge did not increase and no burning smells like before. I would like to add that when the master cylinder was repacked in 2017 the British cat shop used a TR6 unit. I want to take it for a longer drive but I think it is fixed. Thanks for the great info from all. Steve
|
||||||||||||
|
| |||||||||||||