View single post by TommyV9
 Posted: 07-05-2019 02:51 pm
PM Quote Reply Full Topic
TommyV9

 

Joined: 06-20-2019
Location: Cape Girardeau, Missouri USA
Posts: 19
Status: 
Offline
 As mentioned in previous posts, I've changed cam cover gaskets, new MC and stainless braided lines and new cam belt.

I just finished flipping the cam pulleys over to time to designed 110/110 timing from the 115/115 timing it had. Next I want to check the static timing. I've read how to do it with a 12v light or multi meter. My question is which fastener do I loosen to be able to turn the dizzy and check/adjust static timing? Note in the attached pic I found there is a nut on a bolt at approx they 12:00 position that is in line with the shaft of the dizzy and there is a hex head with a slot for a screw driver at what I'll call the 3:00 position that is at 90* to the shaft of the dizzy. Which to loosen?

TIA
Tom

Attachment: lotus dist..jpg (Downloaded 128 times)

Last edited on 07-05-2019 02:53 pm by TommyV9