View single post by Dakota123
 Posted: 06-16-2019 03:10 pm
PM Quote Reply Full Topic
Dakota123

 

Joined: 03-20-2009
Location: Colorado USA
Posts: 180
Status: 
Offline
Greg Fletcher wrote:
. Snip...

BTW, the JHPS 104 cams are 0.432" lift and 268 degrees duration but with 235 degrees duration at 0.040" lash. These will give slightly better torque than most of the profiles out there.


That’s interesting, Greg— It’s been a long while since I started on my 2.2L build, and I was sorting through the cams I have on hand. One of them has three grooves (which may or may not mean anything, I know), a wide nose rather than the sharper nose of the two 104s I have on hand, and ~0.430” lift. Does this sound like the club store 107, maybe?