View single post by Mark Rosenbaum
 Posted: 10-12-2005 02:12 pm
PM Quote Reply Full Topic
Mark Rosenbaum



Joined: 03-12-2005
Location: Kingman, Arizona USA
Posts: 532
Status: 
Offline
 While I wouldn't apply the word 'screwy' to the JH wiring -- which is actually very logical and sensible once you understand what they were trying to do -- I otherwise agree with Judson's comments.

To speed up tracing things out, one could start by presuming that the black/white wire is the one that runs from distributor to coil (-) side.  If that proves to be the case, end of problem.  Otherwise one must trace, trace, trace....