View single post by Frank Schwartz
 Posted: 12-09-2018 06:09 am
PM Quote Reply Full Topic
Frank Schwartz

 

Joined: 02-18-2011
Location:  
Posts: 313
Status: 
Offline
 Fuse 3 feeds the clock, the dip switch on the light switch the right hand door light switch and the fasten seat belt light, which is also on #8 of the crazy buzzer unit, also #4 non the buzzer unit which is part of the seat belt circuit....As for your seat switches, I suggest since you are not using them that you just tape any exposed ends and leave them unattached and stowed under the carpet.

If your buzzer unit is still in the car and you are not using it for the seat belt light and seat circuit, you should remove the plug from it and jumper #11 and #12..this will enable starting..if these are not jumpered your car will never start. Have you removed this plug already?

To simplify matters since you are not using the seat belt circuits, remove the plug and jumper 11 and `12 on it.,..that should also stop the #3 fuse from blowing....

And #3 fuse will not effect the starting, but if you unplug that plug on the buzzer unit, it will most likely stop the fuse from blowing...but remember 11 to 12 on the plug...essential to start...

Give it a try and let us know, please.
Frank