View single post by Art DeKneef
 Posted: 10-18-2016 07:24 pm
PM Quote Reply Full Topic
Art DeKneef

 

Joined: 03-12-2005
Location: Mesa, Arizona USA
Posts: 338
Status: 
Offline
 I changed the fuse box to a modern flat fuse box with 6 fuses. Currently using four of the six fuses. I did this during the rebuild when I had everything apart so it was a little easier working with the wires.

It wasn't that difficult but like everything with these cars time consuming. I made a couple of small brackets that I attached to the existing wiring harness cover opening. So the only thing I purchased was the fuse block, some fuses and wire ends.

So far it has been working fine.