View single post by Greg Fletcher
 Posted: 07-11-2016 07:35 pm
PM Quote Reply Full Topic
Greg Fletcher



Joined: 03-11-2005
Location: Lake Nacimiento, California USA
Posts: 430
Status: 
Offline
 Lots I don't know, but I would also look toward a blocked oil gallery at this point as that sounds like some very serious pressure building up. Be sure you use a good quality oil filter too, such as a K&N. An oil filter with a malfunctioning by-pass valve can cause all kinds of problems. I would start with the easiest thing first, the oil filter and then remove the oil pump housing and carefully go through it to see if anything is amiss.