View single post by Brett Gibson JH5 20497
 Posted: 06-06-2016 01:53 pm
PM Quote Reply Full Topic
Brett Gibson JH5 20497


Joined: 03-17-2005
Location: Hilton, New York USA
Posts: 751
You can buy the bearing for $13.10 and the seal for $10.80 from JAE and do it yourself, they even have a tool to set everything for around $35, that way you can go into the re-build business yourself.
A new impeller cost about $40 but most of the time you can re-use your old one, or better yet get a 910 impeller rather than the 907 and increase your water volume flow and keep the engine running cooler. (some machining is required to use a 910).