View single post by subwoofer
 Posted: 05-07-2016 03:10 pm
PM Quote Reply Full Topic
subwoofer

 

Joined: 04-01-2008
Location: Sandefjord, Norway
Posts: 617
Status: 
Offline
 I'm pretty convinced the problem is electrical, I pulled a main jet to check for fuel on the emulsion tube, and there was fuel to the ridge below the top holes, I think that is about right. Still no sign of life.

It is clear that the problem is heat related, but there may be more than one fault. I just got a new battery, but even at the second attempt it didn't quite fit, some adjustment with a cutter and the welder required...