View single post by atgparker
 Posted: 04-08-2016 02:50 pm
PM Quote Reply Full Topic
atgparker



Joined: 06-23-2013
Location: Mission Viejo, California USA
Posts: 90
Status: 
Offline
 In my travels with working out a Toyota W58 conversion for 11602 I have found a source for a clutch disk with the following specification: Disk OD is 8.34" (212 mm) the spline is the 1-1/8 x 21 T size for the Celica/supra gear box. They mate the rather over sized spline hub with a kevlar lined disk that will fit in an 8.50" clutch cover which has a 250 mm bolt circle diameter for fixing it to the flywheel.
The out fit is in New England and is called Wishbone Classics. MG's and Triumphs are there specialty.

The shifter is a Cube short throw unit from Australia. This will kind of work nicely with the transmission kit from Conversion Components in New Zealand. Fortunately the Celica gearbox came with its rear cross member and this worked a ton better than the kit supplied one. The difference being that the OEM Celica one has a mid-span bend a lot like the OEM JH has.

Attachment: WP_20160221_001.jpg (Downloaded 345 times)

Last edited on 01-11-2020 10:32 pm by atgparker