View single post by Jensen Healey
 Posted: 03-22-2016 09:50 pm
PM Quote Reply Full Topic
Jensen Healey



Joined: 03-11-2005
Location: San Anselmo, California USA
Posts: 976
Status: 
Offline
Welcome to the message board Azvat1!

Both of the my cars had the nuts welded inside the cross channels. I had to grind off the Allen heads of several bolts to get the seats out.

I drilled through the floor pan and used fender washers on the new, longer Allen head bolts that I found at Ace hardware.

Good luck, Kurt