View single post by Brett Gibson JH5 20497
 Posted: 02-28-2016 01:56 pm
PM Quote Reply Full Topic
Brett Gibson JH5 20497


Joined: 03-17-2005
Location: Hilton, New York USA
Posts: 736
The cable would be the first place to look and hopefully that would be it, next I would make doubly sure that the shifting fork is properly fitted to the throw out bearing, can be checked while doing the cable. After that the shifter assembly can also be a problem, the plastic bushings wear out and the whole thing gets sloppy, that can be removed and rebuilt without pulling the transmission. And lastly, worst case it's inside the trans..........