View single post by Tom Bradley
 Posted: 12-10-2015 08:50 pm
PM Quote Reply Full Topic
Tom Bradley

 

Joined: 07-15-2013
Location:  
Posts: 95
Status: 
Offline
Be careful putting in the oil cooler hoses. I bought a pair with the stainless steel braid from Delta recently. It was definitely a tight fit. In the process of getting them in I think I pulled too much on one of the right-angle ends that connect to the oil cooler so there was a slight oil leak that I did not notice for some time. Pushing the hose back over the metal sleeve seems to have fixed it, but I would have more confidence if it had never leaked in the first place.