View single post by
 Posted: 12-07-2015 07:23 am
PM Quote Reply Full Topic


Joined: 10-04-2013
Location: Riverside, California USA
Posts: 106
Got the water pump, pulley, fan and alternator all mounted. Got the clutch working and the throttle cable connected. Still need to seal around the peddle housing to keep water from entering the drivers foot area. But you know it never rains in California. Got most of the radiator hoses in as well as the new Aluminum radiator.

I need new hose grommets for the oil cooler lines. The lines almost seem a little short, but I will see if all hook up before getting back to Mike at Delta. He has been a lot of help over the last couple of years of this restoration.

Tomorrow I am going to start on the fuel system and reinstall the fuel pump and fuel tank. I am going to reverse the feed for the Dellorttos and feed from the rear and not the front. The conversion looks pretty straightforward.

My goal is to put power to the ground wheels before the end of December. Looks like it might be possible.