View single post by Michael Fishelson
 Posted: 11-19-2015 09:18 pm
PM Quote Reply Full Topic
Michael Fishelson

 

Joined: 05-12-2015
Location:  
Posts: 9
Status: 
Offline
I started to install a new canvas top and have a question. It seems that there must be a part missing or i am missing something. The material rolls over the forward edge of the top but, there is now way to mechanically fasten it to the framework (see picture below). It seems that it needs to be stapled or clipped in some manner.

The material needs to be trimmed and there is a rubber gasket that covers the gap. Is there something I am missing or does it just get glued in place?



Attachment: car-small.gif (Downloaded 89 times)