View single post by UKJames
 Posted: 11-10-2015 02:38 pm
PM Quote Reply Full Topic
UKJames

 

Joined: 04-24-2014
Location: Berkshire, United Kingdom
Posts: 43
Status: 
Offline
Just wondering what the general consensus is on the best jetting/choke size for DHLA40E, stock Euro cams, 2.0.
There is a wealth of info on different specs for the DHLA45's, but not so much for the smaller carbs. My DHLA's have got 4 progression holes and are stamped DHLA40E.
I've currently got 35mm chokes, 130 (7772.5) main, 55 (7850.7) idle.
Looking for that elusive best compromise of good acceleration across the RPM range. Don't expect to see the red line very often...
Thanks-
Jim