 |
PM |  | |
Quote | | |
Reply | | |
Full Topic | |
| Joined: | 03-12-2005 |
| Location: | Kingman, Arizona USA |
| Posts: | 532 |
| Status: |
Offline
|
The part where the clamp goes doesn't seal or hold pressure, it's just a mechanical stop, so you can try to re-use the distributor at least for a little while. I suggest using emery cloth or something similar to slightly roughen the remaining lip on the distributor body, and the inner surface of the clamp, so that you'll get sufficient friction to hold things together until you can arrange for a replacement.