View single post by NigelK
 Posted: 06-17-2015 10:35 pm
PM Quote Reply Full Topic


Joined: 07-16-2014
Posts: 166
Hi Barthol

In your diagram, the left hand side of the spring should be inserted in the hole in the left hand brake shoe which is up and to the left of the rectangular slot through which the hand brake mechanism lever protrudes. It is a very fiddly job to insert the spring - I found it can help to hold the hand brake lever at an angle with the spring attached in the correct place at both ends, and then twist the lever into position. This gives you more leverage over the spring.

Hope this helps.

Best wishes,