View single post by Bfitz241
 Posted: 04-14-2015 11:36 pm
PM Quote Reply Full Topic
Bfitz241

 

Joined: 02-05-2015
Location: Saint Augustine, Florida USA
Posts: 159
Status: 
Offline
Had a productive day today. Radiator out, and it's starting to fall apart, has scale on the inside and some green corrosion at the bottom of the core. It's a 3 core, which is good. The fan clutch is leaking ever so slightly so I fear its life is probably over. Water pump out, looked ok but I took it out so it's getting rebuilt. All the hoses are garbage and the clamps have seized so the hoses were cut.
Took out the master cylinder and am in the process of taking out the booster. There's rust on the body below the booster I want to attend to so even though it works, it's coming out.
One question; are the front fenders bolted or welded on?
Thanks