View single post by Screenplay
 Posted: 11-18-2014 09:18 pm
PM Quote Reply Full Topic
Screenplay

 

Joined: 07-12-2013
Location: San Francisco, California USA
Posts: 124
Status: 
Offline
 Well, the fuel pump is now operating. I guessed that the white wire (the one with the junction connected to the rear window defrost) was pos and ran a new wire to pos fuel pump. I then ran a wire from the pump ground to the black wire that disappears into the loom. It's good to get this stuff working but it would be even better if these wire colors actually matched some of the wiring diagrams out there.