View single post by UKJames
 Posted: 09-22-2014 10:35 am
PM Quote Reply Full Topic


Joined: 04-24-2014
Location: Berkshire, United Kingdom
Posts: 42
I think that's the seal I need included with this kit. With the MC off I should be able to access well enough to remove the old seal. I'll clean up the push rod while I'm at it and lubricate with some brake lubricant for good measure.

I am quite surprised at how quickly the vacuum is lost though on pedal pressure, I would have expected a faulty seal to 'seep' air not 'dump' it. Maybe the whole seal is lifting of the flange it sits on. I'll have a closer look tonight.