View single post by NigelK
 Posted: 07-21-2014 08:44 pm
PM Quote Reply Full Topic
NigelK

 

Joined: 07-16-2014
Location:  
Posts: 200
Status: 
Offline
 The blower motor does not work on my GT. After two sessions with the multimeter, I have discovered that the heater/AC/anti-run on relay is cooked. This is the relay which ensures the heater/AC can only run when the ignition is switched on, and also ensures that the anti-run on system (which is not fitted on my UK-spec car) is activated when the ignition is switched off.

There is no continuity between the winding terminals on the relay, which suggests the resistor is burned out and, therefore, cannot close the heater/AC switch.

But I can't find the correct part number for a replacement relay in my GT parts book. The relay circuitry (printed on the top of the relay) is the same as Lucas part SRB411 and Jensen part CT1802 (Interceptor AC / fuel lid relay).

But SRB411/CT1802 is a red cylinder, and my relay is a black cylinder. Plus it's on a 35A fused circuit, while SRB411/CT1802 is rated at 20A.

Anyone got any ideas?