View single post by Mark Rosenbaum
 Posted: 08-16-2005 09:18 pm
PM Quote Reply Full Topic
Mark Rosenbaum



Joined: 03-12-2005
Location: Kingman, Arizona USA
Posts: 532
Status: 
Offline
 Jim, you described the British Wiring switch as 'shorter'.  Is that less height, or less depth?  And do you have a measurement?

For what it's worth, my car's failed Lucas hazard switch (stamped 39868D and datecode 0387) measures as follows:
*  The switch body is 0.900" wide x 1.504" high x 0.831" deep from rear of bezel to rear of body.
*  The contact pins are 0.118"-0.122" diameter and protrude 0.375" beyond the rear of the body.
*  The bezel section is 1.033" wide x 1.539" high x 0.125" maximum thickness.

 

Last edited on 08-16-2005 09:18 pm by Mark Rosenbaum