View single post by Jensen Healey
 Posted: 06-08-2014 04:08 pm
Full Topic
Jensen Healey



Joined: 03-11-2005
Location: San Anselmo, California USA
Posts: 983
Status: 
Offline
Well, I managed to lever the door upward about 3/16". This door doesn't fit very well in the hole and I suspect the fenders were removed for the previous Earl Scheib paint job.

The outer handle is jammed and it must be opened from the inside. I need to remove the handle and lock for paint anyway so maybe I can figure out the problem. I blame it on the DPO!
Kurt