View single post by Barthol
 Posted: 06-04-2014 02:34 pm
PM Quote Reply Full Topic
Barthol

 

Joined: 10-31-2013
Location: Denmark
Posts: 67
Status: 
Offline
 Rebuilding my engine i mount what is supposed to be a freshly rebuild oil pump.

When mounted I decided to spin it using my cordless drill.
I spinned for 4 minutes at 1300 rpm without the it being able to build up pressure.

is the 1300 rpm to little ? I guess that it only corresponds to 650 engine rpm.

After this I put the pump in a vice and tried to measure the vacum with a vacuum gauge on a rubber flange.

At 1300 rpm it only produced 10 mbar of vacuum.

Is there a trio to start up a rebuild pump or could there be something wrong with it?

Br
Kim