View single post by pbahr
 Posted: 04-06-2014 07:52 pm
PM Quote Reply Full Topic
pbahr



Joined: 04-15-2005
Location: Moorestown, New Jersey USA
Posts: 198
Status: 
Offline
Hi lads,
If you are going to purchase cams, I would highly recommend checking with Richard Reyman at West Coast Cylinder Heads: http://www.proheads.com/

Richard built up the 907 engine in YELODOG and does his own cam grinding.  He did a fantastic job on my engine (240 hp) and may have some 907 cams laying around - or he can grind a set to match the other changes in your engine.

He is well versed in the 907 and had several JH that he used to race.

Pete Bahr