View single post by Harkes
 Posted: 08-12-2005 11:13 am
PM Quote Reply Full Topic
Harkes



Joined: 03-17-2005
Location: Warmond, Netherlands
Posts: 216
Status: 
Offline
 the 104 cam has 272/280 duration, not 230... and that is rather large.

if you are looking for great torque throughout the whole rpm range than the 104 inlet/107 exhaust is what you are looking for, but you can also use a custom cam for the inlet, but i would use the 107 for exhaust.

i should have my dyno results of my 2.2L high compression (1:11) engine, made by Gary Kemps. He used a custom inlet cam with a little more lift than the 104 and a little less duration than the 104 i thought. For exhaust he used the 107.

i could find out more about it if you want..

good luck with your engine

erik harkes 15175, netherlands