View single post by Jensen Healey
 Posted: 11-21-2013 03:02 pm
PM Quote Reply Full Topic
Jensen Healey



Joined: 03-11-2005
Location: San Anselmo, California USA
Posts: 983
Status: 
Offline
 The standard cam is the "c" cam. The intake and exhaust are the same, the manual contains an error concerning cam timing. 272 deg is correct.

The 107 and 104 cams are from later iterations of the 907 engine.

One tooth on the cam pulley is 18 crankshaft degrees IIRC.