View single post by Jensen Healey
 Posted: 08-12-2012 10:04 pm
PM Quote Reply Full Topic
Jensen Healey



Joined: 03-11-2005
Location: San Anselmo, California USA
Posts: 983
Status: 
Offline
 The header is installed! The 12mm washer head on the copper locknuts really helps ease the access. A socket on a wobble can be used on many of them.

I added the obligatory 1/8" shim under the motor mount so the steering knuckle would clear the #1 tube. I also shaved the corner off of the nut which was the contact point before shimming. There's now 5/16" clearance.

My glasspack is stuck on a slow FedEx truck in Kansas so I won't be moaning about the noise for several days!

Kurt