View single post by h2oman
 Posted: 07-06-2012 05:20 am
PM Quote Reply Full Topic


Joined: 07-06-2010
Location: Mariposa, California USA
Posts: 19
I have a 74 JH-5 and have several fluid leaks coming from the Brake pressure differential warning actuator (PDWA). One leak is out of the electrical switch, so my o-rings must be leaking on the sliding valve piece. Also it is leaking out of the front end. Is there a source for washers and o-rings? If not, has any one used an alternative?
I did take it apart and checked it for pitting, and it looks good. It was clean and rust free. The rest of my brake system is clean and recently rebuilt the wheel cylinders and replaced the GTLMA fluid. MC is in good condition and is clean.

Bob Waterman
74 JH-5 19695

Last edited on 07-06-2012 06:52 pm by h2oman