View single post by Dakota123
 Posted: 04-25-2012 07:47 pm
PM Quote Reply Full Topic
Dakota123

 

Joined: 03-20-2009
Location: Colorado USA
Posts: 126
Status: 
Offline
Not a tired subject at all!

It looks like maybe Greg has removed the kit from the club store.

Conversion Components in new Zealand sells a kit:

http://www.conversioncomp.co.nz/products.php?which=34&return=14

It's good for the parts list and to get an idea of how it all fits together, if nothing else. Getting hold of Colin is hit or miss, mostly miss. He can go for weeks or even months without responding. At least, that was my experience.

The input shaft extension is nothing more than an interference-fit sleeve (don;t havit in front of my but maybe 1" or 2" in length) that extends the length that rides in the pilot bearing. Can be fabbed by a machine shop in no time. The other item needed is sleeve to cover a length of the input shaft splines, so the throwout bearing has something to ride on. Again, not much to it.

Hope this helps,

Mike

edit, replace "sleeve" for "splines"

Last edited on 04-27-2012 02:39 am by Dakota123