View single post by Bob 13902
 Posted: 01-18-2012 09:16 pm
PM Quote Reply Full Topic
Bob 13902

 

Joined: 04-05-2006
Location:  
Posts: 35
Status: 
Offline
 There are several bulletins...that were not in my manual. 75-8 and 76-2 address the Oring...if only they told me the material for the tube/pin...bob

74-1 oil tube install
74-23 supercedes 74-1; removes gasket and uses Loctite sealant and maintains 74-1 oil tube or roll pin (depending on engine number)
75-8 Oring+recess+tube/roll-pin (ground if necessary as some too tall when installed per 74-1 because still had gasket then)
76-2 Modification tool for Oring recess