View single post by Somebodystopme!!
 Posted: 11-20-2011 02:34 am
PM Quote Reply Full Topic

Joined: 11-17-2011
Location: Carlsbad, California USA
Posts: 22
I'm 6' 2" and weigh in at 220lbs so I can feel your pain.

I did not take any pics but what I did was remove the 2 risers off the front and rear rail mount. That dropped it around 2" right there.

The seat rails that mount to the floor are still there in the stock location but I took a piece of flat bar and made the seat rail extend back an additional 4" or so. The seat still reclines a little but just enough to be comfortable.

My frame rails are in very poor shape (as far as being easy to move forward and backward) but I will most likely be the only one driving it.

As I sit in it now I am looking out of the upper 2/3 portion of the windshield. right where I should be.