View single post by Jensen Healey
 Posted: 08-23-2011 01:41 pm
PM Quote Reply Full Topic
Jensen Healey



Joined: 03-11-2005
Location: San Anselmo, California USA
Posts: 983
Status: 
Offline
Hi Dan,

Good info! I'll try it next time I'm in there.

I think most cam covers have been overtightened sometime in the last 38 years and spread at the bottom. I've had good luck using the silicone or rubber gaskets installed dry. I did have to do the exhaust twice last time to get it tight.

Kurt